SpoolerBUILD PORTAL

Step 3Body

The body is made of two halves of the arms with a base, a front part and holders. The procedure has five steps.

1. The battery holder

Exploded view of the battery holder and the lid
The battery holder in the arm 02-01-032d and the lid 02-01-046d
QtyPartNote
1Battery holder 26650 or 18650
102-01-046d-BATERY-LIDLid
4M3 insert
6M3x10 screwAs in the drawing
  1. Press the M3 inserts into the arm.
  2. Screw the battery holder on.
  3. Glue or secure the battery cables (see the chapter Electronics) and put the lid on.

2. The latch

Exploded view of the latch
The latch K2469 with the base CLIP_BASE
The finished latch on the body
The finished latch K2469 on the body
  1. Press in two M4 inserts.
  2. Put 02-01-061-CLIP_BASE-M4-assy and the latch K2469 in place and screw them on with two M4x10 screws.

3. The arms with the board

Exploded view of the joining of the arms
ARM-LEFT, ARM-RIGHT, BOARD_HOLDER and the board
QtyPartNote
102-01-032d-ARM-LEFT
102-01-033d-ARM-RIGHT
102-01-105-BOARD_HOLDER with the board (BOARD-ASM)See the chapter Electronics
3Screw M5x50
2M3 insert
2M5 insertAs in the drawing
  1. Press in the M5 and M3 inserts.
  2. Put the board in its holder into ARM-LEFT and connect it before you join the arms.
  3. Put ARM-RIGHT on and pull the arms together with three M5x50 screws.

4. The front part

Exploded view of the front part with the RYGL-L arms
BASE-FRONT 02-01-035d, 2x RYGL-L, the latch catch K2468
QtyPartNote
102-01-035d-BASE-FRONT
202-01-041-RYGL-LOrange
2M5 insertFor RYGL-L
2M4 insertFor the catch
1K2468_9142132 (catch)See Buying
2M4x10 screw

5. The bases and the Packout holders

Exploded view of the bases and the Milwaukee Packout holders
BASE-LEFT 030d, BASE-RIGHT 031d, 2x Milwaukee Packout 040
QtyPartNote
1+102-01-030d-BASE-LEFT, 02-01-031d-BASE-RIGHT
202-01-040-Milwaukee_PackoutEach to its base
8M5x16 countersunk screw4 for each holder
2Screw M5x20Joining the bases
  1. Press the M5 inserts into the bases.
  2. Screw each Packout on with four M5x16 countersunk screws.
  3. Join the bases with the M5x20 screws.
The video opens after you buy this guide.
Body: part one
The video opens after you buy this guide.
Body: part three