SpoolerBUILD PORTAL

Step 2Removable side

Exploded view of the removable side of the spool
The removable side with the spring button

1. Press the M3 inserts into the core

Press six M3 inserts into CORE-REM.

Inserts in the core CORE-REM
Inserts in the core CORE-REM (from the assembly animation)

2. Insert the spring

Put the spring into CORE-REM.

The spring above the core
The spring above the core (from the assembly animation)

3. Fit the button and the holder

Put CORE-BUTTON on the spring and secure it with the ring BUTTON_HOLDER.

The button above the core
The button above the core (from the assembly animation)
The button holder
The button holder (from the assembly animation)

4. Screw on the side

Put SIDE-REMOVABLE on and screw it down with six M3x10 screws. The spool is done: the fixed side and the removable side, which is held by the button in the core.

The core screwed to the removable side
The core screwed to the removable side (from the assembly animation)
The video opens after you buy this guide.See the plans →
Spool: the removable side